Tender Documents - Oil India Limited

900 ft-lbs, peak power not less than 30 HP & having
bottom connection of 2.7/8” API Regular RH box ).
2) 4.3/4” Mud motor for 7” Casing (5/6 lobe
configuration, minimum flow rate 100 GPM, peak torque
not less than 4000 ft-lbs, peak power not less than 100
HP & having bottom connection of 3.1/2” API Regular RH
box )
[Note: At least one no. each of 3.1/2” OD & 4.3/4” OD
respectively should be ready for operation whenever
required with working spares]
iii)
(iv)
(v)
(vi)
(vii)
Casing scrappers of following sizes:
1. One (1) no. suitable for 5.1/2” OD [17-23 ppf] casings
2. One (1) no. suitable for 7” OD [23-29 ppf] casings.
Electric motor driven Blender unit: For blending/mixing
viscous fluids at Workover well-sites. The blender unit tank
should be cylindrical in shape (capacity 4 KL) with electrical
motor driven mixer/ agitator. [With a Provision for Hopper
connectivity]
Filtration unit with accessories: For removing 02-50 micron
fine solid contaminants from workover fluid so as to minimize
damage to the formation. The filtration unit should be compact,
skid mounted with motor driven centrifugal pump mounted on
the same skid.
Suitable size bell nipple and flow nipple for making up at the
wellhead.
Bridge Plug Milling and Retrieving tool with all required
accessories for following casing sizes:
i) One (1) no. suitable for operation in 5.1/2” OD (17-23
PPF) casing.
ii)
One (1) no. suitable for operation in 7” OD (23-29 PPF)
Casing.
(viii) Retrievable type Bridge Plug for squeeze cementing job for
following casing sizes:
i) One (1) no. suitable for operation in 5.1/2” OD (17-23
PPF) casing.
ii)
One (1) no. suitable for operation in 7” OD (23-29 PPF)
Casing.
(ix)
FOSV for tubing: Full Opening Safety Valve (FOSV) for both
2.7/8” EUE & VAM tubing