Download instructions here - Halfords
Download instructions here - Halfords
Download instructions here - Halfords
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
11 Troubleshooting<br />
Problem<br />
GENERAL<br />
Unit will not<br />
power on<br />
No/low audio<br />
output<br />
Poor sound<br />
quality or<br />
distortion<br />
Tel-Mute<br />
malfunction<br />
Unit resets itself<br />
when engine is<br />
off<br />
TFT MONITOR<br />
Monitor does not<br />
open<br />
automatically<br />
No image<br />
Prolonged image<br />
or improper<br />
height/width ratio<br />
display<br />
Monitor stops at<br />
incorrect position<br />
TUNER<br />
Weak station<br />
searching<br />
Cause<br />
Radio Fuse blown<br />
Car battery fuse blown<br />
Illegal operation<br />
Improper audio output<br />
connection<br />
Volume set too low<br />
Improper “MUTE”<br />
connection<br />
Speakers damaged<br />
Heavily biased volume<br />
balance<br />
Speaker wiring is in<br />
contact with metal part<br />
of car<br />
Unauthorized disc is in<br />
use<br />
Speaker power rating<br />
not compatible with<br />
unit<br />
Speaker is shorted<br />
“MUTE” wire is<br />
grounded<br />
Incorrect connection<br />
between yellow<br />
memory wire and<br />
positive battery wire<br />
TFT Auto Open is<br />
turned off<br />
Incorrect connection to<br />
parking brake wire<br />
PARKING is activated<br />
and parking brake is<br />
not engaged<br />
Improper aspect ratio<br />
setup<br />
Moving path is blocked<br />
Auto antenna is not<br />
fully extended<br />
33<br />
Corrective Action<br />
Install new fuse with correct<br />
rating<br />
Install new fuse with correct<br />
rating<br />
Press the RESET button located<br />
in the bottom right corner of the<br />
front panel<br />
Check wiring and correct<br />
Increase volume level<br />
Review wiring diagram and check<br />
“MUTE” connection<br />
Replace speakers<br />
Adjust the channel balance to the<br />
center position<br />
Insulate all speaker wiring<br />
connections<br />
Use original copy<br />
Connect proper speakers<br />
Check speaker connections<br />
Check that “MUTE” connection is<br />
not grounded and that it’s<br />
properly insulated<br />
Check wiring and correct<br />
Turn TFT Auto Open on<br />
Check wiring and correct<br />
Stop vehicle in safe place and<br />
apply parking brake<br />
Use correct aspect ratio setting<br />
Press OPEN key to restart<br />
monitor movement<br />
Connect the auto antenna control<br />
cable properly
Change language