VL2000 ug finalcomp.book - Kodak

System Setup of Optional Functions
Setting Up Printing
5. Select Setup. Select the print options from the options shown.
a. Select an IPDS resolution, which is listed in the Job Setup
Sheet. You can select Auto-resolution if the IPDS resolution is
not known.
b. Select a Print resolution.
c. If necessary, select a Code page that the printer will use if the
host does not specify a code page. The default is International.
Note: The code page selected here does not override any code page
specified in the data.
d. Select an Orientation. The selection controls the orientation of
the form, not of the pages within a form. The page orientation is
selected as part of defining the form.
e. Select End of job operations.
• Select Purge to stop printing between jobs, to allow for
changes of rolls or other transition work.
• Select Continue to allow the next job to print immediately.
f. Select and give the location, dimensions, and color of a cue mark
to be printed on the front.
g. Select and give the location, dimensions, and color of a cue mark
to be printed on the back.
210 KODAK VERSAMARK VL2000 Printing System