VL2000 ug finalcomp.book - Kodak

Printing Problems
Print Screen Status
Printing System Messages
Print Screen Status
The system model indicates the status of all units in the printing system. If
an error is present, selecting the unit activates another status screen.
Tools Screen Status
You may use another indicator of printing machinery status, which
indicates whether the machinery is correctly connected to the controller.
1. From Key Operator mode, select Tools Connections.
The screen shows the status of all active network connections.
2. Verify the following units are shown with a green status block.
• System Controller
• Data Controller
• Tach and Cue
• Print station interface
• Fluid station 1
• Fluid station 2 (dual tower only)
• Transport
• External tach and cue
• CD132:1
• CD132:2
• CD132:3 (dual tower only)
• CD132:4 (dual tower only)
3. Contact Kodak Customer Service if any units are missing or have a
red status block.
Printing Problems
In the case of general printing problems, refer to the printhead and print
station documentation, this system Operator’s Guide, and online Help.
Electrical Control Problems
In the case of electrical problems with the print tower, contact Kodak
customer service.
Paper-related Problems
In case of paper related problems, check for the conditions that follow.
• Paper is correctly webbed.
• Machine components are properly aligned.
Operator’s Guide 305