VL2000 ug finalcomp.book - Kodak

Displaying Print Station Information
selections in the function bar. When PSI is in key operator mode,
additional buttons may be enabled.
Operator mode
Key Operator mode
Operator mode
Key Operator mode
Displaying Print Station Information
The following information provides details about the function bar options
that are displayed after selecting PSI.
Job Controls
Two buttons in the function bar allow you to control a job.
Start or Ready Button
The Ready button indicates the CS300 controller has found a loaded job,
all printheads are ready, and data is available. Printing will occur or
continue at the speed selected in other controller screens.
Use Start to start or resume printing a job. Before printing can occur, the
job must be loaded, all used printheads must be ready, and data must be
available. Printing will occur or continue at the speed selected in other
controller screens.
Stop Button
Use Stop to stop a printing job.
Print Station Controls
Six buttons in the function bar allow you to control a printhead or print
station.
Operator’s Guide 29