Precipitator Optimization System User Manual - Neundorfer, Inc.

More documents

Recommendations

Info

Precipitator Optimization System 7 User Manual 33. DCS Status Pressing the DCS Interface item on the precipitator menu opens the DCS status and configuration window. The Status tab shows the configured DCS addresses and its current value in the POS. The left field displays data that POS is writing out to the DCS interface. The right field is the data that is configured to coming in from the DCS. DCS Interface – Status Tab Driver Statistics Pressing the Show Stats button opens the Driver Statistics window which displays a summery of the communications between the DCS and POS. The first three lines display the DCS interface driver information.Counts – The number of messages received or sent. Time Stamp and Date Stamp – Shows the time and date of the last message. Dt – Is the time between reads. Error – If there is currently a read or write error, this line displays the error number. Error Mess – Displays a brief message describing the error. Copyright © 2007 Neundorfer, Incorporated Specifications and Features subject to change without notice 08/01/07 102
Precipitator Optimization System 7 User Manual Last Error – Displays the error number of the last error that has occurred. Last Error Mess – Displays a brief message describing the last error that has occurred. Error Counts – The number of errors that have occurred. Error Time and Error Date – Displays the time and date that the last error occurred. Error Owner – Shows the read or write statement that generated the error. Error Station – Displays the PLC address of the station that generated the error. Error Mem Addr – Displays the memory address or register number that generated the error. Serial Error – If there is an error with the serial port, the error number will be displayed here. DCS Statistics Window The Show Comm button opens a window that displays the Communication Messages window displays the actual messages being sent and received through the DCS port. The Hold Data button freezes the screen so that users may analyze the messages received and sent. The Data Type selection allows the user to change the method the data is displayed. To understand what is being displayed in this window it is best to think of the DCS interface as a separate application than POS. Messages shown in this display are messages originating from POS being written to the DCS Interface and messages originating from the DCS being written to the DCS Interface. DCS Communication Messages Copyright © 2007 Neundorfer, Incorporated Specifications and Features subject to change without notice 08/01/07 103
Page 1 and 2:
Precipitator Optimization System 7
Page 3 and 4:
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52: Precipitator Optimization System 7
Page 101: Precipitator Optimization System 7
Page 105: Precipitator Optimization System 7
show all

Precipitator Optimization System User Manual - Neundorfer, Inc.

Create successful ePaper yourself

Delete template?

Save as template?