Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
window is closed, the graphs will hold their position for the next time the window is opened. The
3D graph is a dockable window and multiple 3D graphs can be opened and docked
simultaneously. A window is docked by dragging it to the left side or bottom edge of the screen.
The 3D Graph’s default to display Primary Current. The 3D Graph can be set to any of the
parameters in the drop down list below the graph. Click on the arrow, scrolling through the list,
and highlight the desired item to be viewed.
Double Clicking on a bar displays the Lane and Field location of the TR Set it represents and the
value of the data displayed.
Historical – Animation Selection Window
The Historical button allows the
user to access historical data to be
displayed on the graph. When
pressing this button the Historical –
Animation window opens. The
History Variable drop list allows
the user to select which operating
parameter will be graphed. The
Animate Display checkbox
toggles the display from displaying
a single point in time or to animate
the display through a period of
time. The Historical Time
selection sets which time you want
to display on the historical graph.
If you are animating a period of
time then this selection is the start
time of the animation. The
Animation End Time sets the time
at which the animation will end and
must be later than the start time.
The Now buttons set the times to
the current time and date. The
Animation Time Multiplier allows
the animation to run at real time or
faster rate.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
59