Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
Global TR Set Alarm Settings
Click on the Global TR Set Alarms tab to view and edit TR Set alarms. These alarms are
common across all TR set on the configured precipitator. You will need to set these in each
configured precipitator.
Global TR Set Alarms Tab
The TR Set/Com Port Communication alarm priority setting is used to configure POS to alarm
on any voltage control communication failures and communication port problems.
The TR Set Trip Status alarm priority setting is used to configure POS to alarm on a TR Set trip.
The TR Sets in a Lane off or Tripped setting configures POS to alarm after a specific number of
TR sets in a precipitator lane have been turned off or tripped. This alarm uses the same lane
information that is used to build the 3D graphs.
The TR Sets in a Field off or Tripped setting configures POS to alarm after a specific number of
TR sets in a precipitator field have been turned off or tripped. This alarm uses the same field
information that is used to build the 3D graphs.
The TR Sets in a Precipitator off or Tripped setting configures POS to alarm after a specific
number of TR sets in a precipitator have been turned off or tripped.
The TR Set Control Tripped X tines in Y hours configures POS to alarm if a control trips a
specific number of times in a given time frame.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
27