Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
Last Error – Displays the error number of the last
error that has occurred.
Last Error Mess – Displays a brief message
describing the last error that has occurred.
Error Counts – The number of errors that have
occurred.
Error Time and Error Date – Displays the time
and date that the last error occurred.
Error Owner – Shows the read or write statement
that generated the error.
Error Station – Displays the PLC address of the
station that generated the error.
Error Mem Addr – Displays the memory address
or register number that generated the error.
Serial Error – If there is an error with the serial
port, the error number will be displayed here.
DCS Statistics Window
The Show Comm button opens a window that displays the Communication
Messages window displays the actual messages being sent and received
through the DCS port. The Hold Data button freezes the screen so that
users may analyze the messages received and sent. The Data Type
selection allows the user to change the method the data is displayed.
To understand what is being displayed in this window it is best to think of the
DCS interface as a separate application than POS. Messages shown in this
display are messages originating from POS being written to the DCS
Interface and messages originating from the DCS being written to the DCS
Interface.
DCS Communication Messages
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
103