Precipitator Optimization System User Manual - Neundorfer, Inc.

More documents

Recommendations

Info

Precipitator Optimization System 7 User Manual POR Control Select the rapper controller that you would like to use Data Link POR from the dropdown list. Pressing the On button starts Data Link POR. Pressing the Off button will stop Data Link POR. POR Control Pressing the Configure button opens the POR Common Parameters window where changes to the Data Link POR configuration can be made. Configure Box Pressing the Edit Program button opens the MicroRap Control Dialog window. From this window you can create, edit, and save rapper control programs for use with POR. Pressing the Print button will open a Print Preview display showing all information found in the select program box for every POR program associated with the selected rapper control along with the rapper control name. POR Schedule The POR Schedule displays in graphical form the schedule for each POR program. Each different color marker identifies a different program. The placement of the markers indicates at what time the program will run. POR Schedule Copyright © 2007 Neundorfer, Incorporated Specifications and Features subject to change without notice 08/01/07 54
Precipitator Optimization System 7 User Manual POS setup table The POR setup table contains all the POR programs and their setup/schedule information for the selected MicroRap control. Selected Program Box To delete the selected POR program, click on the Delete button at the far right of the programs line. When a program is deleted it is removed from the list of POR programs associated with the selected rapper control. When Data Link POR is on, clicking on the Run Now button immediately starts the selected program. The Run Now button is not available if a POR program is currently running. Color: TR Set: Setpoint: Program name: Next Start Time: Duration: Repeat Time: Enable: Press the Select button to open the color palette pop up window. Choose a color from the palette and press the OK button. If you do not want to change the color press the Cancel button. The newly selected color will be used to identify the POR Program on the schedule. Use the dropdown list to select the TR Set that the POR program will reduce power. Enter a value or use the up and down arrows to set the percentage that will be used as the reduced power for the duration of the POR Program. Use the drop down list to select the Rapper Program you want to run for the duration of the POR sequence. Click on the day, hour, or minute display and use the up and down arrows to select the start time for the POR Program. Enter a value or use the up and down arrows to select how long the program will run. Values must be between 1 and 60 minutes. Use the drop down list to select how often the POR program will run. The choices are once every 4 hours, 6 hours, 8 hours, 12 hours, or 1-7 days. Click the check box to enable the POR program. If a POR Program is not enabled it will not appear on the schedule and will not run. Copyright © 2007 Neundorfer, Incorporated Specifications and Features subject to change without notice 08/01/07 55
Page 1 and 2:
Precipitator Optimization System 7
Page 3 and 4: Precipitator Optimization System 7
Page 53: Precipitator Optimization System 7
Page 105:
Precipitator Optimization System 7
show all

Precipitator Optimization System User Manual - Neundorfer, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?