Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
Shutdown Parameters
Use the radio button to
select what will happen
when MicroRap
Optimization is turned off.
Select Continue running
current active program to
make the rapper control
continue running the
current program when
optimization is turned off.
Select Switch to the
program that was
running prior to
MicroRap Optimization
starting to make the
rapper control switch back
to the program that was
running when optimization
was first turned on.
Select Switch to program
and select a program
number using the up and
down arrows in the box to
make the rapper control
run the selected program
when optimization is turned
off.
MicroRap Optimization Common Parameters Window
Invalid Signals
Use the radio button to select what MicroRap Optimization will do when a Load or Opacity
signal is invalid.
Select Shutdown MicroRap Optimization following configured shutdown actions to have
optimization shut down when the Load or Opacity signals become invalid.
Select Continue to run MicroRap Optimization ignoring conditions with invalid signals to
have optimization ignore any conditions that are based on the invalid Load or Opacity signals.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
51