Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
Rapping Sequence
This is where the device rapping order is set for selected field. The scroll list displays the
rappers’ names in order of rapping sequence. Rappers can be added, inserted and deleted. To
delete a single rapper select the rapper by clicking on its sequence number and pressing the
Remove button. You can insert rappers into the sequence by selecting the location to insert it by
clicking on the sequence number and pressing the Screen Pick (Insert at #) button. Change
which field sequence you are viewing by clicking on the field buttons across the top of the page.
Buttons with bold text have rappers in their sequence.
Select the Dual Rapping field to allow the controller to energize two rappers in unison.
Select the POR Enable field to enable the Power Off Rapping output for that rapper. The
MicroRap will send out a POR signal to the MVC according to the POR Lead Time parameter.
Use the Rapper On Time drop down list to set the on time for impact rappers in half-cycles and
in seconds for vibrators.
Use the Intensity drop down list to set the conduction angle of the phased-fired outputs.
Click the Select All button before making any changes to have your changes apply to all rappers
in the sequence for the selected field.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
41