Precipitator Optimization System User Manual - Neundorfer, Inc.
Precipitator Optimization System User Manual - Neundorfer, Inc.
Precipitator Optimization System User Manual - Neundorfer, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Precipitator</strong> <strong>Optimization</strong> <strong>System</strong> 7<br />
<strong>User</strong> <strong>Manual</strong><br />
SO3 <strong>Optimization</strong> Configuration Window<br />
This window allows users to change the settings for the SO3 <strong>Optimization</strong>.<br />
PPM Adjustment – Tells the optimization program to<br />
make adjustments to the feed rate by 1 or ½ PPM<br />
Wait Time – Sets the amount of time the program<br />
waits to set the opacity and Power dead bands.<br />
Opacity Dead Band – sets the opacity dead band.<br />
Power Dead Band – sets the power dead band in<br />
the units of the selected power parameter.<br />
Power Parameter Selection – Select the Power<br />
Parameter the program will monitor.<br />
PLC PPM Adjustment – When checked, this option<br />
allows POS to reset the default PPM in the control<br />
PLC when a better default PPM is achieved.<br />
Monitored Controls – Use the dropdown list(s) to<br />
select the control(s) the program will use to monitor<br />
the power parameter.<br />
SO3 <strong>Optimization</strong> Configuration<br />
To save any changes press the Accept button before<br />
closing the Configuration Window.<br />
Copyright © 2007 <strong>Neundorfer</strong>, <strong>Inc</strong>orporated<br />
Specifications and Features subject to change without notice<br />
08/01/07<br />
98