Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
28. TR Set-Up
The TR Set-Up module displays the configuration parameters for each MVC in the precipitator.
This module is accessed by clicking on the TR setup item on the TR set menu. The names of the
T/R Sets appear across the top of the tab.
Limits and Setpoint Tab
Both the Limits and Setpoints and the Configuration and Calibration tabs can be used to
quickly view any changes in MVC set points and limits. Use the Display Saved Data check box
to toggle between the Saved Data reference configuration and the current Live Data. Not al
parameters are available in each TR control. Refer to the voltage control manual for descriptions
of each parameter.
Configurations can be saved for reference. If POS detects any parameter on any T/R Set is
changed to a value different than the saved configuration, the parameter will be outlined in red.
To update the saved configuration with the current configuration press the Save as Default
button.
The Trend button allows the user to trend the TR controls settings for the controls that have the
parameter logging function enabled. Parameter logging is enabled and disabled in the TR set
properties, described elsewhere in this manual. Logged historical data can be viewed using the
date selection on the lower right corner of the screen.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
83