Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
Check the If load is greater than check box and enter a value in the MW field. In power plant
installations if this box is checked the current running POR Program will abort if Load becomes
greater than the specified value.
Check the If load changes check box and enter a value in the MW/Min field. In power plant
installations if this box is checked the current running POR Program will abort if Load changes at
a rate greater than the specified value.
POR Alarm Configuration Box
When POR is turned ON or OFF and when a POR program begins, messages are written to the
POS alarm log. Use the radio buttons to select the priority of the message.
Select Disabled to disable alarms. Data Link POR will not send any messages to the alarm log
if alarms are disabled.
Select Event to have any change cause an event to be logged in the alarm log.
Select Pop Up to have any change cause POS to create a low priority alarm and a pop up
window for the alarm message.
Select Medium to have any change cause POS to create a medium priority alarm.
Select High to have any change cause POS to create a high priority alarm.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
57