Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
The Rapper Optimization and Power Off Rapping contains the ON/OFF status of those
modules. The Current Active POR program field contains the POR program name of the
currently active POR program. This field will be blank in no program is active.
Rapper Program Management (Program Transfer Tab)
The Program Transfer tab is used to manage the Rapper Programs on the selected rapper
controller. This tab can be used to transfer programs from the controller or disk file to another
program number in the controller, overwrite a disk file or create a new file. This is completed by
selecting the appropriate From item and To item and then pressing the Transfer button.
These functions are used to transfer rapping program sequence and timing data between the
rapper controller and the POS computer. The MicroRap only executes programs that are stored
locally at the control. The current design of the MicroRap allows for six (6) programs to be stored
at once. You need to specify which of the six (6) programs you wish to transfer to or from the
computer.
Rapper programs stored on the hard drive of the POS computer can have any file name with the
extension of .PGM and there is no limit to the number of programs that can be stored on disk.
The default directory for POS programs is C:\VTS\pos7\pgm.
Program Select Tab
The Print Rapper Program allows you to print rapper programs from three different sources.
These sources are a specific Controller Program number, a Disk File or the Last Program
Transferred to or from the rapper control. Select the appropriate source and press the Print
button. To delete a rapper program disk file, select the file name from the drop list in the Rapper
Program Delete section and then press the Delete button.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
35