Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
16. Alarm and Precipitator Configuration
Clicking on the Alarm Settings menu items in the rapper control, TR set and precipitator menus
will open up the Precipitator Data Display window. This module is used to describe the
precipitator to POS and configure all alarms for the precipitator, voltage controls and rapper
controls.
Precipitator Data Display Window – Field Data Tab
Editing Field Data
Editing precipitator data is a password protected function. Users need to log in with the proper
security level before making any changes. When finished be sure to press the Accept button to
save changes. Pressing the X button to the right edge of the field clears all values from that field.
All of the information entered on this screen is used by POS to determine how much to offset the
rapper actuations to allow for the time it takes the ash to travel from rapper location to the opacity
meter.
Enter a name for the field in the Field Name field. This name will be used by POS to create the
names for the fields in the Rapper/Opacity Plot and in the rapper properties.
Enter the number of gas passages in the field in the Number of Gas Passages field.
Enter the number of inches between plates in the field in the Plate Spacing field.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
23