Precipitator Optimization System User Manual - Neundorfer, Inc.
Precipitator Optimization System User Manual - Neundorfer, Inc.
Precipitator Optimization System User Manual - Neundorfer, Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Precipitator</strong> <strong>Optimization</strong> <strong>System</strong> 7<br />
<strong>User</strong> <strong>Manual</strong><br />
The TR Set Local/Remote hand switch change alarm setting configures POS to alarm when<br />
control is toggled between remote and local modes.<br />
The TR Set Power changes from <strong>Precipitator</strong> by X% in Y hours alarm setting configures POS<br />
to alarm if a TR set power level drifts from the total precipitator power level in a given time frame.<br />
The TR Set Spark Rate is X% over Baseline Setpoint configures POS to alarm if a voltage<br />
control is sparking a given percentage above its spark rate set point.<br />
Individual T/R Set Alarm<br />
Click on the Individual TR Set Alarms tab to view and edit TR Set alarms. This page allows you<br />
to configure alarms for TR electrical parameters for each individual TR. They can be set the<br />
same across the precipitator or individually for each TR set. You will need to set these in each<br />
configured precipitator.<br />
Individual T/R Set Alarms Tab<br />
To set up these alarms first select the edit button. Then in the Configuration section select the<br />
alarm priority that you would like. The Set all controls equal check box allows for the settings in<br />
one control to be set identically in all controls on this precipitator. Leaving this box unchecked<br />
Copyright © 2007 <strong>Neundorfer</strong>, <strong>Inc</strong>orporated<br />
Specifications and Features subject to change without notice<br />
08/01/07<br />
28
Change language