Precipitator Optimization System User Manual - Neundorfer, Inc.

Precipitator Optimization System 7
User Manual
or precipitator power levels that will cause optimization to abort to 100% power and start the
process over or cause optimization to step back one step in the program before proceeding
further. These limits and others are defined in the configuration portion of the manual.
Auto Optimization suspension function provides an auxiliary input to optimization that will reset
voltage controls to full power when the signal is present. POS will remember the program step it
was executing when the signal was applied. When the signal is removed, POS will step through
the optimization program at an accelerated rate until it reaches its previous location in the
optimization program. When it reaches the previous location POS will revert to its default step
time. The accelerated step time is user configurable and a parameter in optimization properties.
If POS has to step back three times on a single program step when it is executing the
optimization program at an accelerated rate, POS will revert to the default step time.
Starting/Stopping Performance Optimization
Optimization Controls
Pressing the On button turns on selected optimization program and optimization begins.
Pressing the Off button turns off optimization program and voltage controls go to full power.
The Program drop list allows the user to select what optimization program to run.
The Status field contains information regarding the operation of optimization. Messages such as
current step, optimization started, stopped, step back, step number, last step and aborted, among
others, will be displayed here.
The Time Left displays the time that is remaining in the current program step.
Copyright © 2007 Neundorfer, Incorporated
Specifications and Features subject to change without notice
08/01/07
63