SPECIFICATION FOR THE DESIGN OF - Transcon Steel

Commentary on the Prescriptive Method for One and Two Family Dwellings - 2004 93
REFERENCES
(AFPA, 1995), Wood Frame Construction Manual, American Forest and Paper Association,
Washington DC, 1995.
(AISC, 1990), Steel Design Guide Series No. 3, Serviceability Design Considerations for Low-Rise
Buildings, American Institute of Steel Construction, Chicago IL, 1990.
(AISC, 1991), Structural Performance Requirements For Domestic Steel Framing, Australian Institute
of Steel Construction, Milsons Point, Australia, 1991.
(AISI, 1998), Shear Wall Design Guide, American Iron and Steel Institute, Washington, DC, 1998.
(AISI, 1999), Specification for the Design of Cold-Formed Steel Structural Members, 1996 Edition with
1999 Supplement, American Iron and Steel Institute, Washington, DC, 1999.
(AISI, 2001a), Standard for Cold-Formed Steel Framing – General Provision, American Iron and Steel
Institute, Washington, DC, 2001.
(AISI, 2001b), Standard for Cold-Formed Steel Framing – Truss Design, American Iron and Steel
Institute, Washington, DC, 2001.
(AISI, 2001c), Standard for Cold-Formed Steel Framing – Header Design, American Iron and Steel
Institute, Washington, DC, 2001.
(AISI, 2001d), Standard for Cold-Formed Steel Framing – Prescriptive Method for One and Two Family
Dwellings, American Iron and Steel Institute, Washington, DC, 2001.
(AISI, 2004), 2004 Supplement to the Standard for Cold-Formed Steel Framing – Prescriptive Method
for One and Two Family Dwellings, 2001 Edition, American Iron and Steel Institute, Washington,
DC, 2004.
(ASCE, 1998), ASCE 7, Minimum Design Loads for Buildings and Other Structures, American
Society of Civil Engineers, Reston VA, 1998.
(ASTM, 2000), ASTM C954, Standard Specification for Steel Drill Screws for the Application of
Gypsum Panel Products or Metal Plaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in.
(2.84 mm) in Thickness, ASTM International, West Conshohocken PA, 2000.
(ASTM, 2001), ASTM C1002, Standard Specification for Steel Self-Piercing Tapping Screws for the
Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs, ASTM
International, West Conshohocken PA, 2001.
(BOCA, 1997), National Building Code, 1997 Edition, Building Officials and Code Administrators
International, Country Club Hills, IL, 1997.
(ICC, 2000a), International Building Code, International Code Council Falls Church, VA, 2000.
(ICC, 2000b), International Residential Code, International Code Council Falls Church, VA, 2000.
(LGSEA, 1998), Technical Note No. 558b-1, Lateral Load Resisting Elements: Diaphragm Design
Values, Light Gauge Steel Engineers Association, Washington, DC, 1998.
(NAHBRC, 2003), Hybrid Wood and Steel Sole Plate Connection Walls to Floors Testing Report,
National Association of Home Builders’ Research Center, Upper Marlboro, MD, 2003.
(SBCCI, 1999), Standard Building Code, Southern Building Code Congress International,
Birmingham, AL, 1999.
Vagh, Dolan and Easterling (2000), Effect of Anchorage and Sheathing Configuration on the Cyclic