PDFï¼7.7MB
PDFï¼7.7MB
PDFï¼7.7MB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Basic Selection for TAC Mills<br />
Die Engraving /<br />
Pocketing<br />
Work materials<br />
For long<br />
overhang<br />
applications<br />
9-107<br />
Milling without chatter can<br />
be achieved by overlapping<br />
the serrated cutting edges.<br />
Used for long overhang<br />
applications.<br />
Steel<br />
Stainless Cast Iron Non-ferrous Superalloys<br />
Max. ap:<br />
RCMT12 = 6.0 mm<br />
RCMT16 = 8.0 mm<br />
p<br />
9<br />
TAC Mills<br />
TRC<br />
ERC<br />
Pitch Number of inserts<br />
Coarse Long Extra Long<br />
ø32 3 3 3<br />
ø33 3 3 3<br />
ø40 2, 4 2, 4 2, 4<br />
ø50 3, 4, 5 3, 5 3, 5<br />
ø52 4, 5 - -<br />
ø63 5, 6 - -<br />
ø80 6, 7 - -<br />
ø100 7 - -<br />
ø125 8 - -<br />
Diameter<br />
Clamping Air hole<br />
Screw<br />
Wiper Adjusting<br />
- -<br />
Shank type Close pitch<br />
-<br />
Accuracy<br />
C<br />
Variations of inserts<br />
General purposewith<br />
serrated cutting edge<br />
General purpose,<br />
Round insert<br />
For aluminium alloys, with<br />
serrated cutting edge<br />
NMJ<br />
MJ<br />
NAJ<br />
Work materials<br />
For small &<br />
medium<br />
machines<br />
9-78<br />
Multi-functional “Hybrid TAC Mill”<br />
Can be applied to a variety of<br />
machining applications such as<br />
shoulder milling, slotting and<br />
hole making.<br />
Steel<br />
Stainless<br />
Cast Iron<br />
90°<br />
ap<br />
Non-ferrous<br />
Max. ap: EVH06: 3 mm<br />
EVH07: 3.5 mm<br />
EVH09: 4.5 mm<br />
EVH<br />
Pitch Number of inserts Clamping Air hole Long shank<br />
Diameter Standard SS - FiT<br />
ø10 2<br />
ø12 2<br />
ø16 2<br />
Variations of inserts<br />
General purpose<br />
MJ<br />
For aluminium alloys AJ / DLC coated<br />
Accuracy<br />
G<br />
9–30