You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Shape group codes (continued)<br />
Group codes<br />
Description<br />
20, 30 DXF: Y and Z values of insertion point (in WCS)<br />
40 Size<br />
2 Shape name<br />
50 Rotation angle (optional; default = 0)<br />
41 Relative X scale factor (optional; default = 1)<br />
51 Oblique angle (optional; default = 0)<br />
210 Extrusion direction (optional; default = 0, 0, 1)<br />
DXF: X value; APP: 3D vector<br />
220, 230 DXF: Y and Z values of extrusion direction (optional)<br />
SOLID<br />
The following group codes apply to solid entities. In addition to the group<br />
codes described here, see “Common Group Codes for Entities” on page 60.<br />
For information about abbreviations and formatting used in this table, see<br />
“Formatting Conventions in This Reference” on page 6.<br />
Solid group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbTrace)<br />
10 First corner<br />
DXF: X value; APP: 3D point<br />
20, 30 DXF: Y and Z values of first corner<br />
11 Second corner<br />
DXF: X value; APP: 3D point<br />
21, 31 DXF: Y and Z values of second corner<br />
12 Third corner<br />
XF: X value; APP: 3D point<br />
SOLID | 101