Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Arc group codes (continued)<br />
Group codes<br />
Description<br />
51 End angle<br />
210 Extrusion direction (optional; default = 0, 0, 1)<br />
DXF: X value; APP: 3D vector<br />
220, 230 DXF: Y and Z values of extrusion direction (optional)<br />
ATTDEF<br />
The following group codes apply to attdef (attribute definition) entities. In<br />
addition to the group codes described here, see “Common Group Codes for<br />
Entities” on page 60. For information about abbreviations and formatting<br />
used in this table, see “Formatting Conventions in This Reference” on page 6.<br />
Attdef group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbText)<br />
39 Thickness (optional; default = 0)<br />
10 First alignment point (in OCS)<br />
DXF: X value; APP: 3D point<br />
20, 30 DXF: Y and Z values of text start point (in OCS)<br />
40 Text height<br />
1 Default value (string)<br />
100 Subclass marker (AcDbAttributeDefinition)<br />
50 Text rotation (optional; default = 0)<br />
41 Relative X scale factor (width) (optional; default = 1). This value is also<br />
adjusted when fit-type text is used<br />
51 Oblique angle (optional; default = 0)<br />
7 Text style name (optional, default = STANDARD)<br />
ATTDEF | 65