AutoCAD® 2002 - Autodesk

MLINESTYLE group codes (continued)
Group codes
Description
49 Element offset (real, no default). Multiple entries can exist; one entry for
each element
62 Element color (integer, default = 0). Multiple entries can exist; one
entry for each element
6 Element linetype (string, default = BYLAYER). Multiple entries can exist;
one entry for each element
The 2 group codes in mline entities and MLINESTYLE objects are redundant
fields. These groups should not be modified under any circumstances,
although it is safe to read them and use their values. The correct fields to
modify are:
Mline
Mlinestyle
The 340 group in the same object, which indicates the
proper MLINESTYLE object.
The 3 group value in the MLINESTYLE dictionary,
which precedes the 350 group that has the handle or
entity name of the current mlinestyle.
OBJECT_PTR
The following group codes are used by OBJECT_PTR objects. In addition to
the group codes described here, see “Common Group Codes for Objects” on
page 116. For information about abbreviations and formatting used in this
table, see “Formatting Conventions in This Reference” on page 6.
OBJECT_PTR group codes
Group codes
Description
0 Object name (OBJECT_PTR)
5 Handle
102 Start of persistent reactors group; always “{ACAD_REACTORS”
330 Soft-pointer ID/handle to owner dictionary
102 End of persistent reactors group, always “}”
132 | Chapter 7 OBJECTS Section