AutoCAD® 2002 - Autodesk

Mtext group codes (continued)
Group codes
Description
210 Extrusion direction (optional; default = 0, 0, 1)
DXF: X value; APP: 3D vector
220, 230 DXF: Y and Z values of extrusion direction (optional)
11 X-axis direction vector (in WCS)
DXF: X value; APP: 3D vector
NOTE A group code 50 (rotation angle in radians) passed as DXF
input is converted to the equivalent direction vector (if both a code 50
and codes 11, 21, 31 are passed, the last one wins). This is provided as
a convenience for conversions from text objects
21, 31 DXF: Y and Z values of X-axis direction vector (in WCS)
42 Horizontal width of the characters that make up the mtext entity. This
value will always be equal to or less than the value of group code 41
(read-only, ignored if supplied)
43 Vertical height of the mtext entity (read-only, ignored if supplied)
50 Rotation angle in radians
73 Mtext line spacing style (optional):
1 = At least (taller characters will override)
2 = Exact (taller characters will not override)
44 Mtext line spacing factor (optional):
Percentage of default (3-on-5) line spacing to be applied. Valid values
range from 0.25 to 4.00
Xdata with the "DCO15" application ID may follow an mtext entity. This contains
information related to the dbConnect feature.
OLEFRAME
The following group codes apply to oleframe entities. In addition to the
group codes described here, see “Common Group Codes for Entities” on page
60. For information about abbreviations and formatting used in this table,
see “Formatting Conventions in This Reference” on page 6.
OLEFRAME | 93