You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
LTYPE<br />
The following group codes apply to LTYPE symbol table entries. In addition<br />
to the group codes described here, see “Common Group Codes for Symbol<br />
Table Entries” on page 37. For information about abbreviations and formatting<br />
used in this table, see “Formatting Conventions in This Reference” on<br />
page 6.<br />
LTYPE group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbLinetypeTableRecord)<br />
2 Linetype name<br />
70 Standard flag values (bit-coded values):<br />
16 = If set, table entry is externally dependent on an xref<br />
32 = If this bit and bit 16 are both set, the externally dependent xref<br />
has been successfully resolved<br />
64 = If set, the table entry was referenced by at least one entity in the<br />
drawing the last time the drawing was edited. (This flag is for the<br />
benefit of AutoCAD commands. It can be ignored by most programs<br />
that read DXF files and need not be set by programs that write DXF<br />
files)<br />
3 Descriptive text for linetype<br />
72 Alignment code; value is always 65, the ASCII code for A<br />
73 The number of linetype elements<br />
40 Total pattern length<br />
49 Dash, dot or space length (one entry per element)<br />
74 Complex linetype element type (one per element). Default is 0 (no<br />
embedded shape/text).<br />
The following codes are bit values:<br />
1 = If set, code 50 specifies an absolute rotation; if not set, code 50<br />
specifies a relative rotation<br />
2 = Embedded element is a text string<br />
4 = Embedded element is a shape<br />
LTYPE | 45
Change language