Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Angular dimension group codes (continued)<br />
Group codes<br />
Description<br />
24, 34 DXF: Y and Z values of definition point for linear and angular<br />
dimensions (in WCS)<br />
15 Definition point for diameter, radius, and angular dimensions (in WCS)<br />
DXF: X value; APP: 3D point<br />
25, 35 DXF: Y and Z values of definition point for diameter, radius, and<br />
angular dimensions (in WCS)<br />
16 Point defining dimension arc for angular dimensions (in OCS)<br />
DXF: X value; APP: 3D point<br />
26, 36 DXF: Y and Z values of point defining dimension arc for angular<br />
dimensions (in OCS)<br />
The points (13,23,33) and (14,24,34) specify the endpoints of the line used<br />
to determine the first extension line. Points (10,20,30) and (15,25,35) specify<br />
the endpoints of the line used to determine the second extension line. Point<br />
(16,26,36) specifies the location of the dimension line arc. The point<br />
(11,21,31) specifies the midpoint of the dimension text.<br />
The point (15,25,35) specifies the vertex of the angle. The points (13,23,33)<br />
and (14,24,34) specify the endpoints of the extension lines. The point<br />
(10,20,30) specifies the location of the dimension line arc and the point<br />
(11,21,31) specifies the midpoint of the dimension text.<br />
Ordinate Dimension Group Codes<br />
The following group codes apply to ordinate dimensions. In addition to the<br />
group codes described here, those listed in “Common Group Codes for Entities”<br />
on page 60 and “Common Dimension Group Codes” on page 69 can<br />
also be present. For information about abbreviations and formatting used in<br />
this table, see “Formatting Conventions in This Reference” on page 6.<br />
Ordinate dimension group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbOrdinateDimension)<br />
13 Definition point for linear and angular dimensions (in WCS)<br />
DXF: X value; APP: 3D point<br />
DIMENSION | 75