Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Text group codes (continued)<br />
Group codes<br />
Description<br />
220, 230 DXF: Y and Z values of extrusion direction (optional)<br />
100 Subclass marker (AcDbText)<br />
73 Vertical text justification type (optional, default = 0): integer codes (not<br />
bit-coded):<br />
0 = Baseline; 1 = Bottom; 2 = Middle; 3 = Top<br />
See the Group 72 and 73 integer codes table for clarification<br />
The following table describes the group codes 72 (horizontal alignment) and<br />
73 (vertical alignment) in greater detail.<br />
Group 72 and 73 integer codes<br />
Group 73 Group 72<br />
0 1 2 3 4 5<br />
3 (top) TLeft TCenter TRight<br />
2 (middle) MLeft MCenter MRight<br />
1 (bottom) BLeft BCenter BRight<br />
0 (baseline) Left Center Right Aligned Middle Fit<br />
If group 72 and/or 73 values are nonzero then the first alignment point values<br />
are ignored and AutoCAD calculates new values based on the second<br />
alignment point and the length and height of the text string itself (after<br />
applying the text style). If the 72 and 73 values are zero or missing, then the<br />
second alignment point is meaningless.<br />
TOLERANCE<br />
The following group codes apply to tolerance entities. In addition to the<br />
group codes described here, see “Common Group Codes for Entities” on page<br />
60. For information about abbreviations and formatting used in this table,<br />
see “Formatting Conventions in This Reference” on page 6.<br />
TOLERANCE | 105