You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
For information about abbreviations and formatting used in this table, see<br />
“Formatting Conventions in This Reference” on page 6.<br />
Text group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbText)<br />
39 Thickness (optional; default = 0)<br />
10 First alignment point (in OCS)<br />
DXF: X value; APP: 3D point<br />
20, 30 DXF: Y and Z values of first alignment point (in OCS)<br />
40 Text height<br />
1 Default value (the string itself)<br />
50 Text rotation (optional; default = 0)<br />
41 Relative X scale factor—width (optional; default = 1)<br />
This value is also adjusted when fit-type text is used<br />
51 Oblique angle (optional; default = 0)<br />
7 Text style name (optional, default = STANDARD)<br />
71 Text generation flags (optional, default = 0):<br />
2 = Text is backward (mirrored in X)<br />
4 = Text is upside down (mirrored in Y)<br />
72 Horizontal text justification type (optional, default = 0) integer codes<br />
(not bit-coded)<br />
0 = Left; 1= Center; 2 = Right<br />
3 = Aligned (if vertical alignment = 0)<br />
4 = Middle (if vertical alignment = 0)<br />
5 = Fit (if vertical alignment = 0)<br />
See the Group 72 and 73 integer codes table for clarification<br />
11 Second alignment point (in OCS) (optional)<br />
DXF: X value; APP: 3D point<br />
This value is meaningful only if the value of a 72 or 73 group is nonzero<br />
(if the justification is anything other than baseline/left)<br />
21, 31 DXF: Y and Z values of second alignment point (in OCS) (optional)<br />
210 Extrusion direction (optional; default = 0, 0, 1)<br />
DXF: X value; APP: 3D vector<br />
104 | Chapter 6 ENTITIES Section
Change language