You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Lwpolyline group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbPolyline)<br />
90 Number of vertices<br />
70 Polyline flag (bit-coded); default is 0:<br />
1 = Closed; 128 = Plinegen<br />
43 Constant width (optional; default = 0). Not used if variable width<br />
(codes 40 and/or 41) is set<br />
38 Elevation (optional; default = 0)<br />
39 Thickness (optional; default = 0)<br />
10 Vertex coordinates (in OCS), multiple entries; one entry for each vertex<br />
DXF: X value; APP: 2D point<br />
20 DXF: Y value of vertex coordinates (in OCS), multiple entries; one entry<br />
for each vertex<br />
40 Starting width (multiple entries; one entry for each vertex) (optional;<br />
default = 0; multiple entries). Not used if constant width (code 43) is<br />
set<br />
41 End width (multiple entries; one entry for each vertex) (optional;<br />
default = 0; multiple entries). Not used if constant width (code 43) is<br />
set<br />
42 Bulge (multiple entries; one entry for each vertex) (optional; default =<br />
0)<br />
210 Extrusion direction (optional; default = 0, 0, 1)<br />
DXF: X value; APP: 3D vector<br />
220, 230 DXF: Y and Z values of extrusion direction (optional)<br />
MLINE<br />
The following group codes apply to mline entities. In addition to the group<br />
codes described here, see “Common Group Codes for Entities” on page 60.<br />
For information about abbreviations and formatting used in this table, see<br />
“Formatting Conventions in This Reference” on page 6.<br />
MLINE | 89