AutoCAD® 2002 - Autodesk

STYLE group codes (continued)
Group codes
Description
70 Standard flag values (bit-coded values):
1 = If set, this entry describes a shape
4 = Vertical text
16 = If set, table entry is externally dependent on an xref
32 = If this bit and bit 16 are both set, the externally dependent xref
has been successfully resolved
64 = If set, the table entry was referenced by at least one entity in the
drawing the last time the drawing was edited. (This flag is for the
benefit of AutoCAD commands. It can be ignored by most programs
that read DXF files and need not be set by programs that write DXF
files)
40 Fixed text height; 0 if not fixed
41 Width factor
50 Oblique angle
71 Text generation flags:
2 = Text is backward (mirrored in X)
4 = Text is upside down (mirrored in Y)
42 Last height used
3 Primary font file name
4 Bigfont file name; blank if none
A STYLE table item is also used to record shape file LOAD command requests.
In this case the first bit (1) is set in the 70 group flags and only the 3 group
(shape file name) is meaningful (all the other groups are output, however).
UCS
The following group codes apply to UCS symbol table entries. In addition to
the group codes described here, see “Common Group Codes for Symbol Table
Entries” on page 37. For information about abbreviations and formatting
used in this table, see “Formatting Conventions in This Reference” on page 6.
UCS | 47