Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Mlinestyle<br />
The 3 group value in the MLINESTYLE dictionary<br />
which precedes the 350 group that has the handle or<br />
entity name of the current mlinestyle.<br />
MTEXT<br />
The following group codes apply to mtext entities. In addition to the group<br />
codes described here, see “Common Group Codes for Entities” on page 60.<br />
For information about abbreviations and formatting used in this table, see<br />
“Formatting Conventions in This Reference” on page 6.<br />
Mtext group codes<br />
Group codes<br />
Description<br />
100 Subclass marker (AcDbMText)<br />
10 Insertion point<br />
DXF: X value; APP: 3D point<br />
20, 30 DXF: Y and Z values of insertion point<br />
40 Nominal (initial) text height<br />
41 Reference rectangle width<br />
71 Attachment point:<br />
1 = Top left; 2 = Top center; 3 = Top right;<br />
4 = Middle left; 5 = Middle center; 6 = Middle right;<br />
7 = Bottom left; 8 = Bottom center; 9 = Bottom right<br />
72 Drawing direction:<br />
1 = Left to right;<br />
3 = Top to bottom;<br />
5 = By style (the flow direction is inherited from the associated text<br />
style)<br />
1 Text string. If the text string is less than 250 characters, all characters<br />
appear in group 1. If the text string is greater than 250 characters, the<br />
string is divided into 250 character chunks, which appear in one or<br />
more group 3 codes. If group 3 codes are used, the last group is a<br />
group 1 and has fewer than 250 characters<br />
3 Additional text (always in 250 character chunks) (optional)<br />
7 Text style name (STANDARD if not provided) (optional)<br />
92 | Chapter 6 ENTITIES Section