You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Spline edge data group codes (continued)<br />
Group codes<br />
Description<br />
10 Control point (in OCS)<br />
DXF: X value; APP: 2D point<br />
20 DXF: Y value of control point (in OCS)<br />
42 Weights (optional, default = 1)<br />
Pattern Data<br />
The following pattern data codes repeat for each pattern definition line. For<br />
information about abbreviations and formatting used in this table, see “Formatting<br />
Conventions in This Reference” on page 6.<br />
Hatch pattern data group codes<br />
Group codes<br />
Description<br />
53 Pattern line angle<br />
43 Pattern line base point, X component<br />
44 Pattern line base point, Y component<br />
45 Pattern line offset, X component<br />
46 Pattern line offset, Y component<br />
79 Number of dash length items<br />
49 Dash length (multiple entries)<br />
IMAGE<br />
The following group codes apply to image entities. In addition to the group<br />
codes described here, see “Common Group Codes for Entities” on page 60.<br />
IMAGE | 83