Download - Wolfram Research

3.7 Numerical Analyses 305
set to zero for all elements for which there is no condition specified in the netlist. You can see the
difference between both possibilities in the following two plots.
Display the first
simulation result.
In[19]:= TransientPlot[tran1, {I$L1[t]}, {t, 0., 1.*^−4},
PlotRange −> All]
0.0015
0.001
0.0005
-0.0005
-0.001
-0.0015
-0.002
0.00002 0.00004 0.00006 0.00008 0.0001 t
I$L1[t]
Out[19]= Graphics
Display the second
simulation result.
In[20]:= TransientPlot[tran2, {I$L1[t]}, {t, 0., 1.*^−4}]
0.0002
0.0001
0.00002 0.00004 0.00006 0.00008 0.0001 t
I$L1[t]
-0.0001
-0.0002
-0.0003
Out[20]= Graphics