PK-232 MBX Operating Manual - N3UJJ

PK-232 OPERATING MANUAL
COMMAND SUMMARY
The same Command Mode entry character COMMAND (default ) is used to exit
Transparent Mode, although the procedure is different than from Converse mode.
Three Command Mode entry characters must be entered lose than On'. times 10
seconds apart, with no intervening characters, after a delay of 'n' times 10
seconds following the last characters typed.
The following diagram illustrates this timing:
last first second third PK-232 now
terminal COMMAND COMMAND COMMAND in Command
Input character character character Mode
entry entry entry
longer shorter shorter n
than “n" than "n" than "n"
CKSG ON OFF
Mode: Packet
Default: OFF
Host: CM
Parameters:
ON - The recorded CTEXT message is sent as the first packet after a
connection is established by a connect request from a distant station.
OFF - The text message is not sent at all.
CMSG (default OFF) enables or disables automatic transmission of the CTEXT
message when your PK-232 accepts a connect request from another station. Set
CMSG ON to give others a message when they connect to your PK-232 or invite them
to leave a message on your MailDrop if you are not there. (See MTEXT.)
8/91 A-26
From The N3UJJ.COM Document Library