User Manual - ShipShop

More documents

Recommendations

Info

Inserting WaypointTo insert a new Waypoint between two existing ones:Place the cursor on the desired Route leg + [INSERT] + move the cursor to thenew position + [ENTER]The new Waypoint is placed.To add a new Waypoint to the last Waypoint of the Route:Place the cursor + [ENTER] + "WAYPOINT" + [ENTER]T-59.05:Place the cursor + [ROUTE]Reversing RouteTo generate a new route reversing an existing one.If in Route Data Report page:[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [REVERSE]The Route is then followed in reverse order, with Waypoints renumbered accordingly.If the destination is placed on the Route, that Route cannot be reversed.Selecting Route Report pageTo give information on Waypoints belonging to the selected Route:[MENU] + "Route" + [ENTER] + "Report" + [ENTER]In this page it is possible to modify the Speed and Fuel consumption values:[MENU] + "Route" + [ENTER] + "Report" + [ENTER] + [SPEED]/[FUEL] + usethe cursor to insert values + [ENTER]Sending RouteTo transmit the Active Route information onto the NMEA output port.[MENU] + "Route" + [ENTER] + "Send" + [ENTER]The NMEA WPL & RTE messages are sent to the output port.Receiving RouteTo save Route information received from the NMEA input port.[MENU] + "Route" + [ENTER] + "Receive" + [ENTER]The received route is saved on the Active route, overwriting it. The NMEA WPL &RTE messages are sent to the input port.Safe Route CheckingThis function checks the presence of particular cartographic objects (see the listbelow) on a range set by the user for all Route legs:♦ Land Areas♦ Shallow Water♦ Intertidal Areas♦ Rocks♦ Wrecks♦ Obstructions♦ Shoreline Constructions♦ Fishing Facility♦ Dredged Areas♦ Diffusers♦ Mooring/Warping Facility♦ Production Installation♦ Pingos♦ No Data Available32 User Manual
If any of these alarm conditions is detected, then the chart plotter highlights thelist of dangerous objects and the correspondant dangerous Route leg. The Routeleg is then drawn in a different color.To activate this function:[MENU] + "Route" + [ENTER] + "Automatic Route Check" + [ENTER] + "On"+ [ENTER]NOTEIf Automatic Route Check is activated, the modified Route legs are checkedeverytime a Waypoint is added, inserted, edited or moved.To select the width of the detected area aside the Route:[MENU] + "Route" + [ENTER] + "Route Width" + [ENTER] + insert the desiredvalue + [SAVE]NOTESafe Route width value represents half the total width checked by thefunction.To select the depth of the detected area aside the Route:[MENU] + "Route" + [ENTER] + "Route Depth" + [ENTER] + insert the desiredvalue + [SAVE]It also possible to select the accuracy for the Route check, among Minimum, Low,Medium, High and Maximum:[MENU] + "Route" + [ENTER] + "Route Check Accuracy" + [ENTER]The list of the dangerous objects found on the charts crossed by the Route isshown in the Route check report, follow the procedure:[MENU] + "Route" + [ENTER] + "Route Check Report" + [ENTER]2.3 GOTO FUNCTIONThis functions allows you to place the destination point and immediately startnavigating to it.Navigation to WaypointPlace the cursor on the desired Waypoint + [ENTER] + "Go To" + [ENTER]or simply:Place the cursor on the desired Waypoint + [GOTO]T-55.10/T-59.05:Place the cursor on the desired Waypoint + [GOTO]A circle surrounds the Waypoint symbol. A dotted line is shown, connecting thedestination with the ship's position. When the destination is placed, all navigationdata are referred to it.Deleting destinationIf the destination has been placed, to stop the navigation to the Waypoint:Place the cursor on destination icon + [STOP]NOTEIf you press [NEXT]/[PREV] the destination icon is moved on the next/previousWaypoint in the Route.Otherwise when the cursor is placed on a generic position on the chart:[ENTER] + "GOTO" + [ENTER] + [STOP]NOTE If you press [START], the destination icon is moved on the new cursor position.User Manual33
Page 1 and 2: CHART PLOTTER NAME DESCRIPTION SOFT
Page 3 and 4: ContentsAbout this User Manual ....
Page 5 and 6: Auto Off ..........................
Page 7 and 8: 5.6.6 Bottom Range ................
Page 10: 12 User Manual
Page 13 and 14: Important InformationWARNINGElectro
Page 15 and 16: 1. Getting StartedThis chapter prov
Page 17 and 18: Alphanumeric Input ProcedureWhen ed
Page 19 and 20: 1.4 CHANGING BACKLIGHT AND CONTRAST
Page 21 and 22: ♦♦Safety Toolbar (interactive a
Page 23 and 24: Fig. 1.10b - Example of Depth Graph
Page 25 and 26: Finding Your Boat PositionThe most
Page 27 and 28: 2. Operations2.1 USER POINTS: MARKS
Page 29: Creating a RouteTo create a new Rou
Page 33 and 34: [MENU] + "Track" + [ENTER] + "Activ
Page 35 and 36: Fig. 2.6 - Example of Quick Info on
Page 37 and 38: To see the "Fishing" object press [
Page 39 and 40: NOTEActivating the Find function a
Page 41 and 42: XTE AlarmTo set an acoustic alarm t
Page 43 and 44: When a certain type of data (Mark,
Page 45 and 46: 3. User Setting Up3.1 GENERAL OPTIO
Page 47 and 48: Mixing Levels[MENU] + "Map Options"
Page 49 and 50: 3.3 OTHER MAP CONFIGURATIONS[MENU]
Page 51 and 52: Underwater Objects SettingsTo contr
Page 53 and 54: T-50.02/T-50.02 FF/S-50.02/T-50.05/
Page 55 and 56: Where:nnnn= 1/2/3 for S-50.02/S-55.
Page 57 and 58: Fig. 3.8.1 - AIS Symbols3.8.2 To se
Page 59 and 60: Fig. 3.9.1 - Download AreaPress [LO
Page 61 and 62: Fig. 3.10.2 - Example of DSC Log pa
Page 63 and 64: 3.14 WORLD BACKGROUND CHARTSThe int
Page 65 and 66: 4. C-LINKC-Link system is a feature
Page 67 and 68: SLAVE CHART PLOTTEROperating modeTo
Page 69 and 70: tion Point (calculated: Current Tim
Page 71 and 72: 5. FISH FINDERT-55.02 FF/T-50.02 FF
Page 73 and 74: Variable Depth Marker (VDM)Horizont
Page 75 and 76: Selection by Soft KeyAny soft key c
Page 77 and 78: The ZOOM IN and ZOOM OUT keysWhen i
Page 79 and 80: 5.5 SOUNDER ADJUSTMENTS WITH SOFT K
Page 81 and 82:
5.6.9 Sensitivity MenuThe Sensitivi
Page 83 and 84:
6. GPSFor centuries, sailors have b
Page 85 and 86:
7. MaintenanceThis chapter gives in
Page 87 and 88:
Terms♦♦♦♦♦♦♦♦♦♦
Page 89 and 90:
♦♦♦♦♦♦♦♦♦♦♦
Page 91 and 92:
♦♦♦♦♦♦♦♦♦♦♦
Page 93 and 94:
S-50.02 & S-55.02FEATURES & FUNCTIO
Page 95 and 96:
CHART PLOTTER DIMENSIONSINSTALLATIO
Page 97 and 98:
External NMEA ConnectionPOWER & I/O
Page 99 and 100:
T-50.02 & T-55.02FEATURES & FUNCTIO
Page 101 and 102:
Removing the MEDIARemove the front
Page 103 and 104:
TYPICAL CONNECTIONSGPS Connection T
Page 105 and 106:
T-50.02 FF & T-55.02 FFFEATURES & F
Page 107 and 108:
cla sser.nAcode dateRemoving the ME
Page 109 and 110:
TYPICAL CONNECTIONSGPS Connection T
Page 111 and 112:
S-50.05 & S-55.05FEATURES & FUNCTIO
Page 113 and 114:
INSERT INTHE SLOTPlacing the front
Page 115 and 116:
EXTERNAL WIRINGPOWER & I/O CONNECTO
Page 117 and 118:
External NMEA Connection1POWER SUPP
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Autopilot ConnectionQUICK DISCONNEC
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Autopilot ConnectionWIRE COLORBLACK
Page 131 and 132:
T-50.06 FF & T-55.06 FFFEATURES & F
Page 133 and 134:
MEDIA INSERTING/REMOVING PROCEDUREI
Page 135 and 136:
External Connection for T-55.06 FFT
Page 137 and 138:
T-55.10FEATURES & FUNCTIONS♦♦
Page 139 and 140:
Removing the MEDIATo remove the MED
Page 141 and 142:
1POWER SUPPLY- +SMART GPSSENSORPOWE
Page 143 and 144:
T-59.01FEATURES & FUNCTIONS♦ Worl
Page 145 and 146:
Removing the MEDIARemove the front
Page 147 and 148:
TYPICAL CONNECTIONSGPS Connection1P
Page 149 and 150:
T-59.05FEATURES & FUNCTIONS♦♦
Page 151 and 152:
Removing the MEDIAOpen the door and
Page 153 and 154:
Autopilot Connection1I/O PORT 1-2PI
Page 155 and 156:
Installing the Smart GPS ExternalT-
Page 157 and 158:
Analytical Index3D Road page ......
Page 159 and 160:
Fish Finder Setup menu ............
Page 161 and 162:
Scrolling Speed ...................
show all

User Manual - ShipShop

Create successful ePaper yourself

Delete template?

Save as template?