User Manual - ShipShop

[MENU] + "Track" + [ENTER] + "Activate"/"Deactivate" + [ENTER]T-59.05:[TRACK] + "Activate"/"Deactivate" + [ENTER]Clearing TrackAll the Track or part of it can be cleared from the screen:[MENU] + "Track" + [ENTER] + "Delete" + [ENTER]T-59.05:[TRACK] + "Delete" + [ENTER][BEGIN], [END] and [WHOLE] allow to identify the start or the end point of the segmentto delete.Selecting Track NumberThe chart plotter has the capability to store up to 5 Tracks. To select a Track:[MENU] + "Track" + [ENTER] + "Config" + [ENTER] + "Active Track" +[ENTER] + use the cursor key to select the number + [ENTER]T-59.05:[TRACK] + "Config" + [ENTER] + "Active Track" + [ENTER] + use the cursorkey to select the number + [ENTER]TRACK TO ROUTE FUNCTIONThis function creates a Route from a pre-recorded Track. To select this menu:[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER]T-59.05:[TRACK] + "Track To Route" + [ENTER]A new window appears on the screen with the following options.Track To RouteExecutes the function that converts the given Track into a Route.[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Track ToRoute" + [ENTER]T-59.05:[TRACK] + "Track To Route" + [ENTER] + "Track To Route" + [ENTER]Select Track NumberSelects the Track input number:[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Select TrackNo." + [ENTER]T-59.05:[TRACK] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Select TrackNo." + [ENTER]Select Route NumberSelects the Route output number:[MENU] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Select RouteNo." + [ENTER]T-59.05:[TRACK] + "Track" + [ENTER] + "Track To Route" + [ENTER] + "Select RouteNo." + [ENTER]User Manual35