User Manual - ShipShop

cla sser.nA♦♦♦♦Display vessel's position, direction and TrackAlarms HandlingMan OverBoard (MOB) to navigate back to a missing person or objectSimulation Mode with cursor controlTECHNICAL SPECIFICATIONS♦ Power consumption : 500 mA max, @ 12V♦ Interface : NMEA-0183♦ Autopilot Interface : NMEA-0180, NMEA-0180/CDX, NMEA-0183♦ Display : Sun Light Viewable Color LCD (active area 5")♦ Display Resolution : 240 x 320 pixels♦ Cartography : C-MAP BY JEPPESEN DATA MEDIA♦ Operating temperature range : 32 to 131 °F (0 to 55 °C)♦ Memory : Non volatile♦ Keyboard : Silicon rubber, backlight♦ Weight : 540 gr. (with external bracket)460 gr. (without external bracket)When the package containing the chart plotter is first opened, please check it forthe following contents (if any parts are missing contact the dealer the chart plotterwas purchased from):♦ Bracket and I/O cable 1,5 mt/5.9 feet♦ Chart plotter's protective cover♦ Fuse 2 Amp. + fuseholder♦ User Manual♦ Cutting template (S-50.02)♦ Smart DGPS WAAS Receiver with cable 15 mt/45 feet (S-50.02)MEDIA INSERTING/REMOVING PROCEDUREInserting the MEDIARemove the front cover as explained in the following figure. Hold the MEDIA bythe long inclined side so that you can see the C-MAP label. Gently push the MEDIAinto the slot; push the MEDIA in as far as it will go to hold fixed into the slot andplace the front cover again.code dateRemoving the MEDIARemove the front cover and eject the MEDIA you wish to remove out of the slot.96 User Manual