PathFinder Software Configuration Guide - Trilogy Communications

More documents

Recommendations

Info

19.3 Software Configuration OverviewPathFinder Version 4.22 User GuideEach matrix has its own local PathfFinder database. Just as before, this carries all of thedata relating to inter-panel communication, 4 wire circuits, local groups, conferences etc.This is defined in exactly the same way as previous PathFinder versions. A prior workingknowledge of the basic steps of PathFinder programming is assumed. Before starting anynetwork related configuration, you should be familiar with:• System Overview• Panel Configuration: defining and targeting keys.There are a number of extra database tables solely related to networking facilities. Thesedefine the following: -• System Number• Network Handles• Remote TargetsThe software configuration is a six-stage process.• Plan the LAN by choosing appropriate system names and numbers. See section19.4.• Complete the System Overview, adding information relevant to the physical layout ofthe matrix port allocation, this includes panel types, 4 wire ports, telephone ports,logic cards and network ports where appropriate. See section 19.5• Add local matrix functionality. See section 19.6• Define local Network Handles. See section 19.7• Define Remote System Targets. See section 19.8• Continue programming panel key layouts by adding keys, which target other (remote)systems. See section 19.9.The system can be configured with three different network port types. These are:• Network Port Free Pool.As the name implies, these network ports are used on a “first available” basis. Ifcommunication between two systems is required, the first available free port will beallocated for the duration of that conversation.• Network Port Dedicated.The Dedicated network port allows a panel on System A not to be restricted by “firstavailable” basis of Free Pool networking and be guaranteed access to System B viathe E1 link.• Network Port 4 wire.The 4-wire Network port behaves in similar way to a copper wire connection from a4-wire port on System A to a 4-wire port on System B.These subjects are discussed in the following sections.Page 108 of 108 Issue 1 Trilogy Communications Limited
19.4 Network ConfigurationPathFinder Version 4.22 User GuidePlan the LAN by choosing appropriate system names and numbers. These need not besequential. For example:NameSystem NumberStudio 1 1Studio 3 3Studio 5 5Studio 7 7Central Hub 10Open PathFinder in the usual way and select the option to create a new configuration. Thebox shown below will appear, prompting you to select the size of the system (i.e. number ofports) and to define a system number for this matrix. If the dialogue box initially displays thesystem number to 1.On first starting theprogram, makecertain that SystemNumber 1 is shown.Set the number ofports to match thesize of matrix used.Trilogy Communications LimitedIssue 1Page 109 of 109
Page 1 and 2:
DIGITAL INTERCOMPathFinderVersion 4
Page 3 and 4:
PathFinder Version 4.22 User GuideE
Page 5:
PathFinder Version 4.22 User GuideS
Page 8 and 9:
PathFinder Version 4.22 User GuideS
Page 10 and 11:
PathFinder Version 4.22 User GuideP
Page 12 and 13:
Page 14 and 15:
PathFinder Version 4.22 User Guide3
Page 16 and 17:
PathFinder Version 4.22 User GuideO
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
4.1.3.1 Opening Alternate Configura
Page 24 and 25:
5.2 Navigating Between PathFinder F
Page 26 and 27:
Page 28 and 29:
5.4.7 Informational IconsPathFinder
Page 30 and 31:
PathFinder Version 4.22 User GuideT
Page 32:
Page 35 and 36:
6.5 Assigning keys to Control Panel
Page 37 and 38:
6.7 Assigning key targetsPathFinder
Page 39 and 40:
6.9 Adding a Quick Response key (QR
Page 41 and 42:
PathFinder Version 4.22 User GuideW
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
7.5 Creating ConferencesPathFinder
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
PathFinder Version 4.22 User GuideT
Page 57 and 58: PathFinder Version 4.22 User GuideT
Page 59 and 60: PathFinder Version 4.22 User Guide9
Page 61 and 62: 9.3.3 Tone BlipsPathFinder Version
Page 65 and 66: 10.1.2 Dim Level and Auto-Listen Ke
Page 67 and 68: PathFinder Version 4.22 User Guide.
Page 73 and 74: PathFinder Version 4.22 User Guide
Page 75 and 76: PathFinder Version 4.22 User GuideS
Page 81 and 82: PathFinder Version 4.22 User GuideI
Page 83 and 84: PathFinder Version 4.22 User GuideN
Page 105 and 106: PathFinder Version 4.22 User Guidew
Page 107: PathFinder Version 4.22 User Guide1
Page 111 and 112: 19.5 System OverviewPathFinder Vers
Page 115 and 116: PathFinder Version 4.22 User GuideI
Page 129 and 130: 20.7 On-LinePathFinder Version 4.22
show all

PathFinder Software Configuration Guide - Trilogy Communications

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?