PathFinder Software Configuration Guide - Trilogy Communications

11.1 Gains - Additional informationPathFinder Version 4.22 User GuideIf 4-wire input gains are adjusted, this gain setting applies to all destinations that the 4-wireis connected to - it is a global gain setting.If 4-wire output gains are adjusted, this gain setting applies to this destinations uniquely,such that all sources to the destination will be received by the destination at the gain setting.Crosspoint gain settings apply uniquely to the specific source/destination route.Any gain changes resulting from dimming, or from adjustment at panels are applied as amathematical addition to the gain setting configured in this gains form.Note - gain control in the Commander matrix is not applied in the analogue domain byamplifier gain adjustment. The matrix performs all audio processing digitally and thereforegains are applied by the digital processing system.Page 68 of 68 Issue 1 Trilogy Communications Limited