PathFinder Software Configuration Guide - Trilogy Communications

5.2 Navigating Between PathFinder FormsPathFinder Version 4.22 User GuideForms appear as a tabbed list visible at all times at the bottom of the screen allowing rapidmovement between them:A new form may be selected by clicking the appropriate tab at the bottom of the screen. Notethat when a new form is selected any changes made to the current form are automaticallysaved. It is also possible to hot switch between forms. This is accomplished using CTRL-{number} where {number} is the appropriate number for the required form.The function of the forms is explained in the following table.Form Name Description Chapter PageOverview Allows port types to be set up (panels, 4- 0 31wire etc) and basic system-wideproperties to be determined.PanelAllows individual panels to be6.5 35Configuration configured, including key types andassignments.GainsAllows gains to be set up for system0 0inputs and outputs, and individualcrosspoint gains to be set.DimmingComprehensive inter-panel/port dimming 0 63features provided to minimise acousticfeedback (howl-round) between areas.Conferences Provides facilities for multiple users to0 43communicate with each other from asingle key.GroupsIntended for many-to-manycommunication such as production (or0 43IFBsLogicsTelephonesFixed CrosspointsOMNI) talkback.Interrupted Foldback, allowing aprioritised interruption of standing feedsand other sources to destinationsComprehensive GPIO facilities forexternal control functions etc.Fully featured auto-hunting DTMFtelephone support.Simple permanent routes betweensources and destinations0053790590850 99Page 24 of 24 Issue 1 Trilogy Communications Limited