PathFinder Software Configuration Guide - Trilogy Communications

12.2 Configuration Database CheckPathFinder Version 4.22 User GuideThe Settings menu now incorporates an option to check and if necessary repair aconfiguration database. It is advisable to back up the current configuration, either by usingthe Save As … command, or copying the files to a separate directory using WindowsExplorer before carrying out this task.The operation can take a few minutes to complete on large configurations, during which timeit will not be possible to make any other system changes from the P.C.12.3 View Crosspoint StatusThis facility is only available with the Rapide option, whilst connected live. It provides asnapshot of the matrix crosspoint status, reported by the TDM system. The value reportedon screen reflects the number of requests for a particular source – destination crosspointpair to be made, so values other than 0 or 1 will appear.Use the Update buttons at the bottom left of the screen to transfer status from the TDMsystem to the GUI. Individual destinations can be updated by highlighting a destination(column) first, then clicking the Update Dest button.Crosspoint Status runs as a separate application within PathFinder. Return to the mainapplication by clicking the X at top right of the screen.Page 70 of 70 Issue 1 Trilogy Communications Limited