PathFinder Software Configuration Guide - Trilogy Communications

PathFinder Version 4.22 User Guide8.2 Programming a Simple IFBThe following example uses:• Director control panel connected to port 1• Sound control panel connected to port 4• Presenter 4-wire circuit connected to port 6.Switch to the IFB form as shown below.Following similar procedures to that used for Groups and Conferences:• Assign a System Name and label to the IFB.• Add the IFB Destination – in this case, Port 6 “Presenter.”• Add the Return Audio Source – in this case, the Director Control Panel.At this point, the form will appear as shown below. There are currently no entries in the IFBtrigger list: there is no method for anyone to speak to the Presenter.Page 54 of 54 Issue 1 Trilogy Communications Limited