PathFinder Software Configuration Guide - Trilogy Communications

More documents

Recommendations

Info

PathFinder Version 4.22 User GuideTo create a crosspoint list:• Select the Xpt Lists radio button from the lower right corner of the logic page.• Enter a list name and label in the Crosspoint List entry.• Next click the “+” button to add a crosspoint list member• Select the source and the destination numbers for the crosspoint to be controlled.If you wish to control a number of crosspoints from this crosspoint list, click the “+” buttonagain and add the next members to the list. When completed, click the tick box to accept thechanges.Page 86 of 86 Issue 1 Trilogy Communications Limited
PathFinder Version 4.22 User GuideThe next step is to configure the crosspoint list as the target of the chosen logic input.1. Select the Inputs radio button on the lower right corner of the logic page.2. Select the Xpt List field of the relevant logic input.3. Right click on this field to view and select from the Xpt List pop-up.4. Finally click the tick box to accept the edit.Note: If you wish this crosspoints created in the crosspoint list to be normally inhibited,change the logic input polarity to be normally closed.15.1.3 Logic Inputs triggering Logic OutputsFirst select the Inputs radio button on the logic page then select the Logic O/P field on thelogic input required. Right click on this field to view the Logic Output list pop-up and selectthe output required. Finally click the tick box to accept the edit.15.1.4 Logic Inputs triggering panel 4-wire callingA 4-wire call is a logic input to the matrix, which is used to make relevant panels in thesystem aware that a 4-wire circuit wishes to speak. Any panel in the system with acorresponding speak key to this 4-wire circuit will flash the related yellow tally as a visualindication that the panel is being called.In addition to the visual indication of the flashing tally the panel can also be programmed tobuzz as an audible indication (Panel Alert) to the 4-wire call.Trilogy Communications LimitedIssue 1Page 87 of 87
Page 1 and 2:
DIGITAL INTERCOMPathFinderVersion 4
Page 3 and 4:
PathFinder Version 4.22 User GuideE
Page 5:
PathFinder Version 4.22 User GuideS
Page 8 and 9:
PathFinder Version 4.22 User GuideS
Page 10 and 11:
PathFinder Version 4.22 User GuideP
Page 12 and 13:
Page 14 and 15:
PathFinder Version 4.22 User Guide3
Page 16 and 17:
PathFinder Version 4.22 User GuideO
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
4.1.3.1 Opening Alternate Configura
Page 24 and 25:
5.2 Navigating Between PathFinder F
Page 26 and 27:
Page 28 and 29:
5.4.7 Informational IconsPathFinder
Page 30 and 31:
PathFinder Version 4.22 User GuideT
Page 32:
Page 35 and 36: 6.5 Assigning keys to Control Panel
Page 37 and 38: 6.7 Assigning key targetsPathFinder
Page 39 and 40: 6.9 Adding a Quick Response key (QR
Page 41 and 42: PathFinder Version 4.22 User GuideW
Page 43 and 44: PathFinder Version 4.22 User Guide7
Page 47 and 48: 7.5 Creating ConferencesPathFinder
Page 55 and 56: PathFinder Version 4.22 User GuideT
Page 57 and 58: PathFinder Version 4.22 User GuideT
Page 61 and 62: 9.3.3 Tone BlipsPathFinder Version
Page 65 and 66: 10.1.2 Dim Level and Auto-Listen Ke
Page 67 and 68: PathFinder Version 4.22 User Guide.
Page 73 and 74: PathFinder Version 4.22 User Guide
Page 75 and 76: PathFinder Version 4.22 User GuideS
Page 81 and 82: PathFinder Version 4.22 User GuideI
Page 83 and 84: PathFinder Version 4.22 User GuideN
Page 85: PathFinder Version 4.22 User Guide1
Page 105 and 106: PathFinder Version 4.22 User Guidew
Page 109 and 110: 19.4 Network ConfigurationPathFinde
Page 111 and 112: 19.5 System OverviewPathFinder Vers
Page 115 and 116: PathFinder Version 4.22 User GuideI
Page 129 and 130: 20.7 On-LinePathFinder Version 4.22
Page 137 and 138:
Page 139 and 140:
PathFinder Version 4.22 User GuideT
Page 141 and 142:
Page 143 and 144:
show all

PathFinder Software Configuration Guide - Trilogy Communications

Create successful ePaper yourself

Delete template?

Save as template?