PathFinder Software Configuration Guide - Trilogy Communications

PathFinder Version 4.22 User GuideWhen the download is complete, the Flash RAM/ re-start option box, shown below isdisplayed.This dialogue box allows you to:• Re-start the system. The recently downloaded configuration (shown in the 'New' box) istransferred from the Buffer RAM into the active system RAM.• Save (or write) a configuration into the chosen flash RAM memory bank. Again, it is the'new' configuration which is written to flash RAM• Load (or read) a configuration from a chosen Flash RAM memory bank back into theBuffer menu area. This operation would normally be followed by a re-start.Approximate times for each of these operations are:• Download: 15-60 seconds• Re-start: 5 seconds• Save: 60 seconds• Load: 5 secondsAll of the above are background operations except the re-start, which is disruptive. Once there-start sequence is indicated,• All routes are broken• All panel keys are turned off• All control panel displays are turned off, and then replaced with the new labels.The system is then ready for use with the new database.Trilogy Communications LimitedIssue 1Page 41 of 41