PathFinder Software Configuration Guide - Trilogy Communications

PathFinder Version 4.22 User GuideCurrently, no Trigger action is set for either of the “potential” triggers. To set a trigger level,right click in the Trigger field and select a level from the pop-up list. The key on theProducer control panel may be converted to an IFB action by assigning a trigger level at thispoint. However, since it was originally targeted directly at the 4-wire port, the key will retainthe label Pres, rather than the unique IFB label Floor.The key on the Sound panel will carry the IFB label Floor.The Sound Engineer now has a priority level 1 key to theStudio Floor Presenter. The Producer retains a simpleSpeak key since no priority level has been set.-------------------------------------------------------------------------------------------------------------------------TIP: It is possible to build the configuration without directly targeting IFB’s at all. Speakkeys may be directly targeted at destination ports, and then modified on the IFB form. Thisconcept can speed the programming process but the keys retain their original labels.-------------------------------------------------------------------------------------------------------------------------For further information on the programming of the more complex IFB facilities please refer toChapter 0.Page 56 of 56 Issue 1 Trilogy Communications Limited