PathFinder Software Configuration Guide - Trilogy Communications

More documents

Recommendations

Info

PathFinder Version 4.22 User GuideNote: The five character name entered in the system label field will appear as the keymnemonic on the panel when the panel key type is a logic key.15.2.2 Programming a logic output groupOnce the logic outputs have been assigned in the Logic Outputs page it is possible to fire upto four logic outputs simultaneously using the logic group facility.To program a logic group:• Select Outputs radio button on the logic page.• Enter a Group name and Label in the logic group entry.• In the O/P fields 1 – 4 enter the logic output entry numbers you wish to group together.Finally, target the logic output group from a logic input or panel key as required.See logic outputs for a further explanation.15.2.3 Column BusyAn 'internal' signal is generated within the matrix software, such that whenever any source isrouted to a chosen destination, the 'column busy' signal is generated and used to fire a logicoutput.A typical application would be a panel key targeted to a RT Base Station, allowing the RT toswitch into 'transmit' when a key is pressed.There are two types of column busy signal.15.2.3.1 Column Busy AllThis signal is activated when any source is routed to a chosen destination.15.2.3.2 Column Busy PanelsThis signal is only activated when a panel source is routed to the chosen destination. 4-wiresource crosspoints do not activate the column busy signal.15.2.3.3 Setting Up a Column BusyFrom the 'logic' tab, select the logic outputs page.‣ Set-up logic outputs either on a GPI card or locally on a panel.‣ In the 'additional function' column, right click and select one of the column busy options(see above).‣ Choose the 'destination port' to be associated with the column busy function.‣ Tick to complete: the function now operates.Page 92 of 92 Issue 1 Trilogy Communications Limited
PathFinder Version 4.22 User Guide15.2.4 4-wire call outputsThis is a similar feature to the column busy (see Chapter 0) with the following differences.‣ Only 4-wire destinations may be targeted: panels are excluded from the list.‣ Panel speaking to the chosen 4-wire destination must have a ring key on the panel,which must be pressed simultaneously with the speak key before the logic O/P isactivated.Trilogy Communications LimitedIssue 1Page 93 of 93
Page 1 and 2:
DIGITAL INTERCOMPathFinderVersion 4
Page 3 and 4:
PathFinder Version 4.22 User GuideE
Page 5:
PathFinder Version 4.22 User GuideS
Page 8 and 9:
PathFinder Version 4.22 User GuideS
Page 10 and 11:
PathFinder Version 4.22 User GuideP
Page 12 and 13:
Page 14 and 15:
PathFinder Version 4.22 User Guide3
Page 16 and 17:
PathFinder Version 4.22 User GuideO
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
4.1.3.1 Opening Alternate Configura
Page 24 and 25:
5.2 Navigating Between PathFinder F
Page 26 and 27:
Page 28 and 29:
5.4.7 Informational IconsPathFinder
Page 30 and 31:
PathFinder Version 4.22 User GuideT
Page 32:
Page 35 and 36:
6.5 Assigning keys to Control Panel
Page 37 and 38:
6.7 Assigning key targetsPathFinder
Page 39 and 40:
6.9 Adding a Quick Response key (QR
Page 41 and 42: PathFinder Version 4.22 User GuideW
Page 43 and 44: PathFinder Version 4.22 User Guide7
Page 47 and 48: 7.5 Creating ConferencesPathFinder
Page 55 and 56: PathFinder Version 4.22 User GuideT
Page 61 and 62: 9.3.3 Tone BlipsPathFinder Version
Page 65 and 66: 10.1.2 Dim Level and Auto-Listen Ke
Page 67 and 68: PathFinder Version 4.22 User Guide.
Page 73 and 74: PathFinder Version 4.22 User Guide
Page 75 and 76: PathFinder Version 4.22 User GuideS
Page 81 and 82: PathFinder Version 4.22 User GuideI
Page 83 and 84: PathFinder Version 4.22 User GuideN
Page 91: PathFinder Version 4.22 User Guide1
Page 105 and 106: PathFinder Version 4.22 User Guidew
Page 109 and 110: 19.4 Network ConfigurationPathFinde
Page 111 and 112: 19.5 System OverviewPathFinder Vers
Page 115 and 116: PathFinder Version 4.22 User GuideI
Page 129 and 130: 20.7 On-LinePathFinder Version 4.22
Page 143 and 144:
show all

PathFinder Software Configuration Guide - Trilogy Communications

Create successful ePaper yourself

Delete template?

Save as template?