PathFinder Software Configuration Guide - Trilogy Communications

More documents

Recommendations

Info

PathFinder Version 4.22 User GuideEnter a system name to serve as a reminder. Since the port will not be directly addressed,there is no requirement to enter labels. These two columns may be left blank. Move thecursor across to the column labelled Net Assignment. Following the instructions on thestatus line, use the F2 key to display the available Remote System Targets. For thisexample, select 6 which corresponds to the MCR manager. This now ensures that:• Any communication from MCR manager to Studio 1 will use the dedicated port• No other inter-studio traffic may use this port• The number of free pool ports is now reduced to 5.See below for the final stage of the configuration.Page 118 of 118 Issue 1 Trilogy Communications Limited
PathFinder Version 4.22 User Guide19.12 Assigning a Dedicated Port in the reverse directionThe configuration explained above guarantees that the MCR Manager will always be able tospeak to operators in Studio 1. To ensure that the reverse direction any replies from Studio 1operators are heard by the MCR Manager, the Network Port type in the Central Hubconfiguration must also be edited. As shown below, the final Free Pool network port isconverted in the Central Hub configuration to a Dedicated port, similar to the previousexample. However, the entry in the Net Assignment column is set to a local (i.e. CentralHub) Net Handle value, corresponding to the MCR Manager. This ensures that:• Any communication from Studio 1 operators to the MCR Manager in the Central Hubuses the dedicated line.• Only five Free Pool routes from Studio 1 to the Central Hub are now available.Follow the instructions on the Overview Page status line and see the completed examplebelow.This concept may be expanded to cover LAN systems comprising three or more matricesalthough there are some limitations. Please contact Trilogy Broadcast for more information.Trilogy Communications LimitedIssue 1Page 119 of 119
Page 1 and 2:
DIGITAL INTERCOMPathFinderVersion 4
Page 3 and 4:
PathFinder Version 4.22 User GuideE
Page 5:
PathFinder Version 4.22 User GuideS
Page 8 and 9:
PathFinder Version 4.22 User GuideS
Page 10 and 11:
PathFinder Version 4.22 User GuideP
Page 12 and 13:
Page 14 and 15:
PathFinder Version 4.22 User Guide3
Page 16 and 17:
PathFinder Version 4.22 User GuideO
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
4.1.3.1 Opening Alternate Configura
Page 24 and 25:
5.2 Navigating Between PathFinder F
Page 26 and 27:
Page 28 and 29:
5.4.7 Informational IconsPathFinder
Page 30 and 31:
PathFinder Version 4.22 User GuideT
Page 32:
Page 35 and 36:
6.5 Assigning keys to Control Panel
Page 37 and 38:
6.7 Assigning key targetsPathFinder
Page 39 and 40:
6.9 Adding a Quick Response key (QR
Page 41 and 42:
PathFinder Version 4.22 User GuideW
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
7.5 Creating ConferencesPathFinder
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
9.3.3 Tone BlipsPathFinder Version
Page 63 and 64:
Page 65 and 66:
10.1.2 Dim Level and Auto-Listen Ke
Page 67 and 68: PathFinder Version 4.22 User Guide.
Page 69 and 70: PathFinder Version 4.22 User Guide1
Page 73 and 74: PathFinder Version 4.22 User Guide
Page 75 and 76: PathFinder Version 4.22 User GuideS
Page 81 and 82: PathFinder Version 4.22 User GuideI
Page 83 and 84: PathFinder Version 4.22 User GuideN
Page 87 and 88: PathFinder Version 4.22 User GuideT
Page 105 and 106: PathFinder Version 4.22 User Guidew
Page 109 and 110: 19.4 Network ConfigurationPathFinde
Page 111 and 112: 19.5 System OverviewPathFinder Vers
Page 115 and 116: PathFinder Version 4.22 User GuideI
Page 117: PathFinder Version 4.22 User Guide1
Page 129 and 130: 20.7 On-LinePathFinder Version 4.22
Page 139 and 140: PathFinder Version 4.22 User GuideT
show all

PathFinder Software Configuration Guide - Trilogy Communications

Create successful ePaper yourself

Delete template?

Save as template?