12.07.2015 Views

Stormwater Quality Design Manual (May 2007) - City of Sacramento ...

Stormwater Quality Design Manual (May 2007) - City of Sacramento ...

Stormwater Quality Design Manual (May 2007) - City of Sacramento ...

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Chapter 3run<strong>of</strong>f reduction first (even if not required) will result in a reduced volume or flow <strong>of</strong>run<strong>of</strong>f that needs to be treated.Step 3: Evaluate Best Approach toProtect <strong>Stormwater</strong> <strong>Quality</strong>Evaluate the best approach to protecting stormwater quality considering the siteconditions, required controls, and the principles outlined in Chapter 2. As explainedin Chapter 2:• Identify opportunities and constraints given the site conditions• Preserve valuable site features where possible (and where required) and workwith the topography• Seek to integrate stormwater controls throughout the site design, such asincorporating them into landscaping and reducing run<strong>of</strong>f close to its source• Look for cost-effective, aesthetically-pleasing ways to treat run<strong>of</strong>f (if treatment isneeded)Step 4: Select Source Control Measures (Chapter 4)Based on step 3, Chapter 4 and Table 4-1, select appropriate source controlmeasures. Source controls are intended to keep pollutants from mixing with run<strong>of</strong>fand traveling <strong>of</strong>f the site. All projects require permanent “no dumping-drains tocreek/river” markings to be applied to storm drain inlets. In addition, source controlmeasures are required for the following areas where there is the potential forpollutants to be exposed to stormwater run<strong>of</strong>f:• Fueling areas• Loading areas• Outdoor storage areas• Outdoor work areas (e.g., processing, manufacturing)• Vehicle and equipment wash areas• Waste management areas (garbage, recycling,restaurant food waste)Source controlmeasures keeppollutants frommixing with run<strong>of</strong>fand traveling <strong>of</strong>fthe siteStep 5: Select Run<strong>of</strong>f Reduction Measures (Chapter 5)Include run<strong>of</strong>f reduction measures in your project design if any <strong>of</strong> the followingapply:• The project requires treatment controls (see Step 6) and you want to reduce theneeded size (and associated cost) <strong>of</strong> required treatment.• You conclude it is cost-effective to incorporate run<strong>of</strong>f reduction measures andyou would like to provide the environmental benefit <strong>of</strong> doing so.• They are required by the local permitting agency for the particular project.<strong>Stormwater</strong> <strong>Quality</strong> <strong>Design</strong> <strong>Manual</strong> for the <strong>Sacramento</strong> and South Placer Regions3-4 <strong>May</strong> <strong>2007</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!