DataKeeper for Windows All Documentation - SIOS

Creating Mirrors With Shared Volumes6. Choose the systems that have volumes which are shared with the source system.Note: If using Windows Server 2012, please see the Known Issue regarding this dialog.Note: All systems connected to the shared volumes must be configured with IP addresses on thesame subnet. The Next button will not be enabled until all included systems have a valid IP address.While it is possible to uncheck the Include box for a given system, the user should be very careful tomake sure that the volume listed really is not a shared volume. It is possible (although unlikely) thatthe hardware signatures of two volumes will match even if they are not shared. In this case, it is validfor the user to uncheck the Include box.7. Select Next. The Choose a Target dialog box appears.8. Choose a Target System, IP Address and Volume.9. Select Next.Note: If there are volumes on other systems that are shared with this target volume, the SharedVolumes dialog will appear next. Configure these shared target volumes as you would for sharedsource volumes, described above.10. Select Next to continue. The Configure Details dialog box appears.11. Use the slide bar to set the data compression level for data sent from the source to the targetsystem.Note: Compression is only recommended to be used when replicating across WAN connections.DataKeeper for Windows Technical DocumentationPage 101